Springvale

Products/Architectural details

Canamould

Superb Architectural Features that take the weight out of detailing

Canamould is a range of superbly detailed, lightweight architectural features which act as an alternative to stone or cast stone detailing.

The moulded core is manufactured from expanded polystyrene (EPS) which is covered with a polymermodified flexible cementitious coating creating features that are exceptionally lightweight, making installation a simple task and health and safety friendly. The installed details are waterproof, durable and unaffected by freeze-thaw cycles.

Canamould offers:

• external fascias/fenestration details
• replicates natural stone
• very lightweight
• easy to transport and install
• reduces build time
• perfect surface finish
• endless product range to suit your needs

Canamould can be used to create a broad range of domestic and commercial architectural features including:

• window cills
• capitals
• window trims
• bands
• cornices
• quoins
• keystones
• pilasters
• columns
• bases

A range of standard profiles is available or bespoke features can be made to your specific requirements.

The features are simply fixed into position using high-performance adhesives and, once fully bonded, will stay there maintenance-free for life.

Durability

Canamould products are dimensionally stable and resistant to attack from insects. Maintenance is minimal. Finished features are:

• unpenetrable by moisture
• unaffected by freeze-thaw cycles
• will not crack, swell, shrink, warp or peel
• extremely hard wearing
• unaffected by sun or UV light

Site Work

Canamould products are delivered to site wrapped in packaging. Store products in a cool, dry place protected from direct sunlight, weather and other damage. Store all finishing and bonding materials at a temperature of not less than 4°C at all times.

Make COSHH safety data sheets for all materials available on site.

Illustrations:

Detail A – EWI

Detail B – Masonry

Detail C – Render

Installation Guide

Substrate must be dry and free of dust or any other ‘bond breaking’ materials. Canamould decorative features are intended for use over the primary exterior weather barrier (i.e. wall system) and are not designed for use in structural applications.

Refer to substrate manufacturer for specific recommendations.

• Measure size needed and saw through clean and smoothly.
• Apply approved adhesive to back of Canamould feature using a notched trowel.
• While adhesive is wet, immediately install Canamould feature and press into place. Remove excess adhesive before it dries.
• Some pieces may require mechanical attachment until adhesive sets. Remove the temporary attachment prior to the finish coat.
• Pieces can be joined using either a mitre or straight cut. Check alignment of joints for proper fit prior to embedding Cana-Mesh with approved basecoat over joints.
• Prior to applying finish, ensure that:
  - All features are completely adhered and fully covered All temporary fasteners are    removed
  - All joints have been treated and sanded flush
  - All Canamould surfaces are clean and free of dirt, dust and other contaminants.